首頁
林正忠
2017/07/10
Email：129787@mail.fju.edu.tw
phone：02-29053791
office/research room：SF720/SF850B
education：國立台灣大學 醫學工程學研究所博士
expertise：醫學影像應用、三維人體動作量測、數位影像處理
self introduction：

學歷
國立台灣大學  醫學工程      博士
國立交通大學  機械工程      學士

經歷
國立台灣大學醫學工程學研究所 博士後研究員
台灣生物力學學會 監事
台灣生物力學學會 副秘書長
台灣健康促進科技協會 理事
 

期刊論文 Journal Papers

  1. Cereatti, A., Bonci, T., Akbarshahi, M., Aminian, K., Barre, A., Begon, M., Benoit D., Charbonnier, C., Maso, F.D., Fantozzi, S., Lin, C.-C., Lu, T.-W., Pandy, M.G. Stagni, R., van den Bogert, A.J. and Camomilla, V. (2017) Standardization proposal of soft tissue artefact description for data sharing in human motion measurements. Journal of Biomechanics, 62: 5-13. (SCI)
  2. Li, J.-D., Lu, T.-W., Lin, C.-C., Kuo, M.-Y., Hsu, H.-C. and Shen, W.-C. (2017) Soft tissue artefacts of skin markers on the lower limb during cycling: effects of joint angles and pedal resistance. Journal of Biomechanics, 62: 27-38. (SCI)
  3. Lin, C.-C., Lu, T.-W., Lu, H.-L., Kuo, M.-Y. and Hsu, H.-C. (2016) Effects of soft tissue artifacts on differentiating kinematic differences between natural and replaced knee joints during functional activity. Gait and Posture, 46: 154-160. (SCI)
  4. Lin, H.-S., Li, J.-D., Chen, Y.-J., Lin, C.-C., Lu, T.-W.* and Chen, M.-H. (2014) Comparison of measurements of mandible growth using cone beam computed tomography and its synthesized cephalograms. Biomedical Engineering Online, 13:133. (SCI)
  5. Lin, C.-C., Lu, T.-W.*, Wang, T.-M., Hsu, C.-Y., Hsu, S.-J. and Shih, T.-F. (2014) In vivo three-dimensional intervertebral kinematics of the subaxial cervical spine during seated axial rotation and lateral bending via a fluoroscopy-to-CT registration approach. Journal of Biomechanics, 47(13): 3310-3317. (SCI)
  6. Lin, C.-C., Chen, C.-C., Chen, Y.-J., Lu, T.-W.* and Hong, S.-W. (2014) A dental implant-based registration method for measuring mandibular kinematics using cone-beam computed tomography-based fluoroscopy. International Journal of Oral & Maxillofacial Implants, 29(4):798-806 (SCI)
  7. Wu, C.-H., Lin, C.-C., Lu, H.-L., Lu, T.-W.* and Yeh, L.-S.* (2014) effects of pelvic and femoral positioning on canine norberg angle measurements and test-retest reliability: a computed tomography-based simulation study. Biomedical Engineering - Applications, Basis and Communications, 26(6):1450076 (SCI)
  8. Lin, C.-C., Lu, T.-W.*, Wang, T.-M., Hsu, C.-Y. and Shih, T.-F. (2014) Comparisons of surface vs. volumetric model-based registration methods using single-plane vs. bi-plane fluoroscopy in measuring spinal kinematics. Medical Engineering & Physics, 36(2):267-274 (SCI)
  9. Kuo, C.-C., Lu, H.-L., Lu, T.-W.*, Lin, C.-C., Alberto L., Kuo, M.-Y. and Hsu, H.-C. (2013) Effects of positioning on radiographic measurements of ankle morphology: a computerized tomography-based simulation study. Biomedical Engineering Online, 12: 131 (SCI)
  10. Wu, C.-H., Lin, C.-C., Lu, T.-W.*, Hou, S.-M., Hu, C.-C. and Yeh, L.-S. (2013) Evaluation of ranges of motion of a new constrained acetabular prosthesis for canine total hip replacement. Biomedical Engineering Online, 12: 116 (SCI)
  11. Lin, C.-C., Zhang, S., Jens F., Lu, T.-W.*, Hsu, C.-Y. and Shih, T.-F. (2013) A slice-to-volume registration method based on real-time magnetic resonance imaging for measuring three-dimensional kinematics of the knee. Medical Physics, 40(10): 102302 (SCI)
  12. Lin, C.-C., Lu, T.-W.*, Shih, T.-F., Tsai, T.-Y., Wang, T.-M., Hsu, S.-J. (2013). "Intervertebral anticollision constraints improve out-of-plane translation accuracy of a single-plane fluoroscopy-to-CT registration method for measuring spinal motion." Medical Physics, 40(3): 031912. (SCI)
  13. Chen, C.-C., Lin, C.-C., Lu, T.-W., Chiang, H., Chen, Y.-J.* (2013) Feasibility of differential quantification of three-dimensional temporomandibular kinematics during various oral activities using a cone-beam CT-based 3D fluoroscopy Method. Journal of Dental Sciences, 8(2): 151-159. (SCI)
  14. Chen, C.-C., Lin, C.-C., Chen, Y.-J., Lu, T.-W.*, and Huang, C.-Y. (2013) Accuracy assessment of a marker-cluster registration method for measuring temporomandibular kinematics using cone-beam computerized tomography with fluoroscopy. Journal of Medical and Biological Engineering, 33: 443-448 (SCI) (2013 JMBE Excellent Annual Paper Award)
  15. Chen, C.-C., Lin, C.-C., Chen, Y.-J., Hong, S.-W., and Lu, T.-W.* (2013) A method for measuring three-dimensional mandibular kinematics in vivo using single-plane fluoroscopy. Dentomaxillofacial Radiology, 42(1): 20110326 (SCI)
  16. Wu, C.-H.+, Lin, C.-C.+, Lu, T.-W.*, and Yeh, L.-S. (2012) Three-dimensional morphometry of native acetabulum in relation to design and implantation of canine total hip replacements. Biomedical Engineering, Applications, Basis and Communication, 24(6): 549-555 (SCI)
  17. Kuo, M.-Y., Lin, C.-C., Hong, S.-W., Tsai, T.-Y., Hsu, H.-C. and Lu, T.-W.* (2011) In vivo three-dimensional kinematics of total knee replacements during open and closed kinetic chain activities. Biomedical Engineering - Applications, Basis and Communications, 23(4): 279-285 (SCI)
  18. Kuo, M.-Y., Tsai, T.-Y., Lin, C.-C., Lu, T.-W.*, Hsu, H.-C. and Shen, W.-C. (2011) Influence of soft tissue artifacts on the calculated kinematics and kinetics of total knee replacements during sit-to-stand. Gait and Posture, 33: 379-384 (SCI)
  19. Tsai, T.-Y., Lu, T.-W.*, Kuo, M.-Y. and Lin, C.-C. (2011) Effects of soft tissue artifacts on the calculated kinematics and kinetics of the knee during stair-ascent. Journal of Biomechanics, 44: 1182-1188 (SCI)

會議論文 Conference Papers and Proceedings (2017-2018)

  1. Lu, H.-Y., Lin, C.-C., Hsu, H.-C., Hung, M.-T., Kuo, M.-Y., and Lu, T.-W.* (2017) In vivo Three-Dimensional Kinematics of the Ankle Joint Complex During Dynamic Dorsiflexion and Plantarflexion Using Alternating Bi-planar Fluoroscopy. 2017 Annual Scientific Meeting of Taiwanese Society of Biomechanics, Taipei, Taiwan, Oct 14.(壁報論文競賽特優)
  2. Pai, S.-C., Lin, C.-C., and Lu, T.-W.* (2017) Effects of Movement Speeds on 3-D Motion Tracking Accuracy of the Tibiofemoral Joint Using Real-Time Magnetic Resonance Image. 2017 Annual Scientific Meeting of Taiwanese Society of Biomechanics, Taipei, Taiwan, Oct 14.
  3. Li, S.-Y., Lin, C.-C., Hsu, C.-Y., and Lu, T.-W.* (2017) A Feasibility Study of a New Fluoroscopy-to-MRI registration Method to Measure in vivo Three-Dimensional Intervertebral Kinematics of the Subaxial Cervical Spine during Flexion-Extension. 2017 Annual Scientific Meeting of Taiwanese Society of Biomechanics, Taipei, Taiwan, Oct 14. (壁報論文競賽優等)
  4. Chang, D.-E., Hsu, C.-Y., and Lin, C.-C.* (2017) Development of Single Camera-Based Computer Assisted Navigation System for Acetabular Cup Positioning. 2017 Annual Scientific Meeting of Taiwanese Society of Biomechanics, Taipei, Taiwan, Oct 14.
  5. Lu, M., Lin, C.-C., and Wu. C.-H. (2017) Effects of Marker Cluster Composition on the Calculated Canine Stifle Kinematics. American College of Veterinary Surgeons Surgery Summit, Indianapolis, USA, Oct 11-14.
  6. Wu, C.-H.*, Lin, C.-C., Chang, C.-L., and Lu, T.-W. (2017) Quantification of Soft Tissue Artifacts in Canine Hindlimb During Passive Stifle Activity. XXVI Congress of the International Society of Biomechanics, Brisbane, Australia, July 23-27.
  7. Lin, C.-C.*, Li, J.-D., Lu, T.-W., Kuo, M.-Y., and Hsu, H.-C. (2017) Development and Validation of a Model-Based Tracking Technique in Conjunction with Alternating Biplane X-ray Imaging System for Measuring 3-D Joint Kinematics. XXVI Congress of the International Society of Biomechanics, Brisbane, Australia, July 23-27.
  8. Lu, H.-Y., Lin, C.-C., Hsu, H.-C., and Lu, T.-W.* (2017) Feasibility of a Model-Based Tracking Method for Measuring In Vivo 3-D Kinematics of the Ankle Joint Complex Using Alternating Biplane Fluoroscopy. XXVI Congress of the International Society of Biomechanics, Brisbane, Australia, July 23-27.
  9. Pai, S.-C., Li, J.-D., Lin, C.-C., Kuo, M.-Y., and Lu, T.-W.* (2017) Comparisons of Tibiofemoral Contact Patterns During Cycling Estimated With and Without Considering Cartilage. XXVI Congress of the International Society of Biomechanics, Brisbane, Australia, July 23-27.
  10. Shih, K.-S., Lin, C.-K., Lu, H.-L., Li, S.-Y., Lin, C.-C., and Lu, T.-W.* (2017) Three-Dimensional Kinematics of Total Knee Replacement During Sit-to-Stand: Comparisons Between Minimally-Invasive and Patient-Specific Instrumentation Procedures. XXVI Congress of the International Society of Biomechanics, Brisbane, Australia, July 23-27.
  11. Lin, C.-C.*, Hsu C.-Y., Shih, T.-F., and Lu, T.-W. (2017) Slice-to-Volume Registration Method Using Real-Time MRI for Vertebral Localization. International Conference on Biomechanics, Rehabilitation Engineering and Assistive Technology, Penghu, April 14-15.
  12. Pai, S.-C., Lin, C-.C., Li, J.-D., Kuo, M.-Y. and Lu, T.-W.* (2017) Comparison of Three-Dimensional Arthrokinematics of Tibiofemoral Joint Calculated With Subject-Specific and Virtual Cartilage Models. International Conference on Biomechanics, Rehabilitation Engineering and Assistive Technology, Penghu, April 14-15. (Outstanding Oral Presentation Award)
  13. Hu, Y.-W., Lin, C.-C., and Wu, C.-H.* (2017) Soft Tissue Artifacts of the Thigh in Canine During Hip Rotation: A Feasibility Study. International Conference on Biomechanics, Rehabilitation Engineering and Assistive Technology, Penghu, April 14-15.
  14. Lu, M., Lin, C.-C., and Wu, C.-H.* (2017) Effect of Marker Composition on Rigid and Non-Rigid Movements of Skin Marker Cluster in Motion for Canine Hindlimb. International Conference on Biomechanics, Rehabilitation Engineering and Assistive Technology, Penghu, April 14-15. (The Poster Award)
  15. Wang, S.-N., Wu, C.-H., and Lin, C.-C.* (2017) Influence of Soft Tissue Artifacts on the Calculated Canine Stifle Kinematics Using Two-Dimensional Models. International Conference on Biomechanics, Rehabilitation Engineering and Assistive Technology, Penghu, April 14-15.

研究計畫

<主持人>
  • 科技部計畫「開發與驗證運用動態核磁共振影像的三維踝關節活動度與穩定度量測方法及其於側踝不穩定之應用」(106-2221-E-030-006-MY2 )，2017/08/01 – 2019/07/31
  • 科技部計畫「結合靜態與動態核磁共振影像開發非侵入式脊椎三維運動量測方法」(105-2221-E-030-005-)，2016/08/01 – 2017/10/31
  • 科技部計劃「結合核磁共振與交替式雙平面透視攝影開發以模型為基礎之創新影像配準追蹤法以量測膝關節三維運動」(104-2218-E-030-001-)，2015/10/01 - 2016/11/30
<共同主持人>
  • 科技部計畫「踝關節融合、固定式與活動式襯墊全人工踝關節之生物力學比較研究及三維列印個人化活動式襯墊全人工踝關節之開發與評估」(106-2221-E-002-066-MY3)，2017/08/01 – 2020/07/31
  • 科技部計畫「應用核磁共振與雙平面透視攝影量測頸椎退化性疾病之活體三維椎間運動和椎間孔與椎管形變」(105-2221-E-192-001-)，2016/08/01 – 2017/12/31





More calendar....